Posted by JK-NY on March 08, 2021 at 12:10:08 from (174.197.209.50):
In Reply to: Do I need more tractor posted by Lowbuck1010 on March 08, 2021 at 04:01:34:
A couple more questions/thoughts that may affect your decisions- it sounds like you do not live in the area or own land there yet? It may take time to develop good hay customers so starting slow might be a good idea as you are basically new to this and need to get a feel for putting up good hay. Depending on the part of NH you intend to live the soils and terrain can vary greatly from flat highly productive river flats to rocky low fertility soils in the hillier/mountain areas of the state. Proximity to customers is important to a small scale hay producer. Lastly based on the assumption that you are not living there now, how far are you going to have to move your tractors and any equipment you may own? It may be cheaper to sell things and buy them once you are moved . That being said I have a friend who moved a whole herd of dairy cows and small line of equipment from WI to Central NY about 40 years ago , and a few years ago a former hay customer that moved a small line of equipment and about 25 horses from Central NY to Southeastern OH, so it can be done.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.