Posted by Mark-Ia on June 02, 2021 at 14:17:13 from (67.55.246.117):
My son-in-law bought a new E110 with a 42 deck last June from Van Wall Equipment in Story City Iowa. First time he mowed with it I told him something was wrong with it as it wasn't cutting right. He called them to come out and check the air pressure in the tires and make sure the deck was level. No better. This spring my Daughter wanted me to look at the mower to see what needed to be done. Took the deck off and found this. Took it back to Van Wall, They installed new blades as you can see and checked for bent spindles, Spindles were fine, said it was better. I took the deck over to a different dealer (K.C. Nielsen) to have them look at it. The shop man looked at it and said; I bet it doesn't mow very good. No sign that it has ever hit anything. Cutting edge is off by 1/2 between blades. They (K.C.Nielsen/ Harcourt Iowa) ordered a new shell for it as it is still under warranty for 388 more days.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
