Most of mine were operating an 18 ton off road forklift. Once in the middle of a January cold stretch, the left side main upright of the mast snapped with a 9k load 6' in the air - it dropped about 2 feet in less time than i could process the sound. That was a spike in the blood pressure... -15 degrees F does interesting things to steel.
With the same machine I punched through the top of an underground tank with the right front set of duals (about a week after i just installed a full set of 10.00-30s) fortunately was able to set the load down in front of and back up out of the hole.. 10K on the front that time.
The year prior s coworker made a hasty dismount when he found an abandoned septic tank with the rear end (steer axle). The counter weight stopped the machine from going backwards into the hole. I had the privilege of backing it out with the rear hung by a crane, followed by a re-rig on the front end (with me feathering the brakes) as he swung the crane and pulled me back over the hole and onto the hard ground.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Cautionary Tale - by Ian Minshull. In the early 1950s my father bought an Allis Chalmers B and I used it for all the row crop work with the mangolds and potatoes, rolling and the haymaking on our farm. The farm and the Allis were sold and I have spent a lifetime working on farms throughout the country. I promised myself that one day I would own an Allis. That time event
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.