Posted by fdt860 on August 22, 2021 at 14:46:46 from (92.184.123.255):
In Reply to: The hitch is in posted by SVcummins on August 19, 2021 at 20:15:42:
Quoting Removed, click Modern View to see
Yes I had a 97 Ford F250 powerstroke for almost all the 5 years I lived in Kansas. I miss the ultra fast governor response while the e40d was shifting up and down. I taught this was quite unique and impressive from the first common rail diesel.
Mine did not have a goiseneck hitch but I tought making one so I could rent a bigger trailer. My plan was to remove the bed and put the support under the bed. Your way is much simpler but on mine the bed was attached to the chassis with rubber mounts, so it would have been difficult to sandwich chassis and bed.
It is your truck and you are excellent driver.
But as a mechanical engineer, I have to warn you against what kind of forces that may be applied to your hitch.
Now, if you are as strong as others, do not worry. And checking bolts tension after 10, 100, 1000 miles is always a cheap insurance...
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
