Posted by Wheat47 on September 08, 2021 at 10:21:52 from (63.153.14.109):
In Reply to: I was a BTO today posted by tomstractorsandtoys on September 07, 2021 at 19:11:56:
Neighbor is gonna start cutting silage next week. He asked me come over Saturday to help break open the fields. He's got a big Deere self-propelled chopper. On the first cut the trucks have follow right behind the chopper. Kinda nerve racking. I've bumped him a couple times. Thank goodness he has the big rubber bumpers on the back of the chopper!!! He runs three older, but nice KW's, an IHC tandem and a Ford Single axel. The hired man get the Ford. He hasn't quite figured out how to shift the 10 speeds and the 9 speeds. Plus he has two KW's with spreader boxes on them. I usually get the one with the hot shift. Don't have to stop to engage the PTO.... just slow down a bit and flip the switch. But it does help to remember to open the gate!!!!
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
