Posted by grandpa Love on October 30, 2021 at 05:17:47 from (71.14.19.222):
My wife fought with these the other day and gave up. She was cooking and baking all day yesterday ( all 4 boys came for supper). I decided to give it a go on carb cleaning. All these go on the Farmall B or A. One carb runs the B fine on 75 percent choke, doesn't smoke, runs up and down the road fine. Had it apart several times, nothing is plugged. Next carb runs the tractor so rich that it pours smoke. No main jet adjustment on it, it's clean and float has been adjusted every way possible. Nothing helps. 3rd card is most puzzling, good and clean, all passages are clear, float is set, not scrubbing on bowl. When you hook gas to it it gurgles, and gas runs out of the main brass jet, and never stops. Verified that float is working by setting top on a glass of water and running water through the inlet. Fills up and stops. Assembly carb and can hear float moving freely in the carb. No idea what the deal is. Final gave up and put a Marvel carb that fits an Allis B on the Farmall B...... Runs perfect! Any advice on the zenith carb collection??
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
