Posted by redforlife on December 08, 2021 at 19:33:59 from (174.210.162.241):
In Reply to: old buildings posted by INCase on December 08, 2021 at 11:20:13:
Old grainery's are not really of much use if they are fixed up and kind of left the way they exist and were built for. Most have wood floors and walls sectioning off the building into rooms like a house. OK for small item storage I guess. But pretty inconvenient for heavy large item storage, or work area that needs to be spacious and open. I can see your reasoning for it to be just dismantled. Exterior barn siding (1X12 and weathered) is what people really want and go for. Not sure if thats what you have or not. If its slatted 1X4's or 6's, or lap board, or T&G siding, nobody is really going to want that. And the rest of the lumber such as rafters, stringers, and studs are just plain old second hand lumber once salvaged, and not worth any premium dollars as (barn) wood. I'd offer it to be torn down for half the lumber. Meaning you keep half the lumber straight down the middle. They in turn get the other half for tearing it down. If there is 2X10's or 12's for floor stringers, or long dimensional lumber in its framing construction, you should get some takers with this offer. When tearing a house down, there is to much waste material and you earn every board you salvage. Its hard to give a house away to be torn down. But a barn or grainery that is not all rotted to heck, pays out alot better in lumber for your time invested. Be careful about letting someone do it that is just wanting the barn board siding. Because, like others have said, they may agree to tear the whole thing down, and just take the siding off and be GONE.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: 1964 JD 2010 Dsl - Part 2 - by Jim Nielsen. Despite having to disassemble the majority of my John Deere 2010's diesel engine, I was still hopeful I could leave the engine-complete with crankshaft and camshaft-in the tractor. This would make the whole engine rebuild job much easier-and much less expensive! I soon found however, that the #4 conrod bearing had disintegrated, taking with it chunks of the crankshaft journal. As a resul
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
