Posted by DR. EVIL on February 02, 2022 at 08:48:48 from (174.192.137.53):
In Reply to: Re: Plowing PSA posted by jal-SD on February 02, 2022 at 08:35:01:
My Brother-in-law's Dad convinced My Dad to switch to Case plows, mostly replaced an IH 4F-43 4-14 Fast Hitch plow with a 4-14 trailing Case plow because the MidWest plow harrow wouldn't work on the Fast Hitch plow but worked great on the Case trailing plow. Dad traded the Case 4-14 for a Case 5-14 when he bought the 4010 Deere, then removed the back bottom so we could run faster than 1st or 2nd gear. With a fresh M&W overhaul and somebody that actually KNEW what they were doing inside a RoosaMaster injection pump it was making 100-105 hp and plowed in 4th or 5th gear till it blew a head gasket one Saturday morning. Having plowed mostly with an IH #8 3-14 and plugged up in corn stalks A HECK of a lot the Case plows seldom plugged up. I'd like to find a 2 or 3 bottom trailing plow to take to local plow days, and it would either be an IH #60 or a CASE.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
