Re: Farmall H 12 volt live hydraulic wont start

Posted by used red MN on June 04, 2022 at 00:13:32 from (75.73.112.20):

In Reply to: Re: Farmall H 12 volt live hydraulic wont start posted by SoulFate15 on June 03, 2022 at 21:10:41:

In the link is a method to set the valve clearance by

turning the engine two revolutions. The valve

clearance spec for your tractor is 0.017 of and inch for

both exhaust and intake valves. It is set by adjusting

then studs in the rocker arms that have the ball ends

the push rods fit into. The clearance is checked by a

feeler gauge. You may have to determine if the mating

surfaces between the rocker arm tip and valve. This is

to make sure you are measuring the spot with the most

clearance. First thing I would do is with the valve cover

off watch the valves on number 4 cylinder as you turn

the engine. When the exhaust valve closes and the

intake is just starting to open stop at that point. The

timing mark should be lined up for TDC on number on

cylinder one. This assures the valve timing of the

camshaft has not changed or slipped. Seems like with

the compression reading you had it seems like it

should be on. Lastly to post a link as I assume you

tried above you need to use the ..Optional link



URL box then title it in the next box down. To post a



link in Modern View you click the URL button paste in

your URL then click the URL button again and you

should be good to go.

Edit: I believe the link I posted for the valve setting diagram was not allowed by YT.

I changed the link to a YT thread that has the diagram in it as a photo.

https://www.yesterdaystractors.com/cgi-bin/viewit.cgi?bd=farmall&th=1070091





This post was edited by used red MN on 06/04/2022 at 08:51 am.

Replies:

Add a Reply! You must be Logged In to Post Name: E-Mail: Subject: (avoid special characters) Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video Embed: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks. No political comments, hate speech or bigotry of any kind will be tolerated. Violations will be removed and posting privileges may be permanently revoked without notice.   Advanced Posting Tools   Select Gallery Photo  Attach Serial No List  Return to Post  Upload Photos/Videos Choose Files from your local computer Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]