Posted by Jim.ME on August 06, 2022 at 14:54:35 from (67.242.176.154):
In Reply to: Loctite 660? posted by Geo-TH,In on August 06, 2022 at 11:27:07:
I have used (and keep some on hand) Loctite 660 to repair parts that have lost a press fit. From my experience with it, I don't see it working for what you are describing. Loctite 660 (aka Quick Metal) is a retaining product used to restore press fits. It would be the wrong product to use to try to fill pits in a cylinder rod or barrel. Loctite does make some putties used for MRO that might work, but if any flakes out it may get into your pump and valves. Some shops can rechrome rods or make new rods from the proper stock. Some can replace the cylinder barrels, reusing the old barrel ends.
A product's Technical Data Sheet published by the product's manufacturer is the best place to get the straight info and parameters for the use of a product, especially these "epoxies".
Here is a copy of the technical data sheet for 660.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
