Hello Wbalcorn welcome to YT! I have no experience with that tractor just taking a stab at it. Did you go by a book when you worked on the MCV or were you just using the fiddle with this and that approach and see if it helps. Not sure if you are aware you can view the parts diagrams for your tractor on line. Look at number 14 in the link, they call it a cooler bypass valve behind plug 17. I would double check it for any issues like sticking, broken spring etc. I also agree with Cat guy, if you just put shims behind a valve because you thought it did not have enough spring pressure not really knowing what you are adjusting I would also say take them back out. You are not saying that there is a problem with any hydraulic function you are just trying to diagnose why it is getting hot. Secondly, how hot is it getting? Hydraulic oil gets hot easily near 200F, if you tore into it as much as you did I would guess you probably have a pretty good idea when it is to hot. I understand that it should flow oil through the cooler. A hand held laser temp scanner can go a long ways to help you diagnose a problem like this. You can get one at auto parts stores or home improvement centers. You are probably a PC guy so viewing that link on there will give you navigation back to all the parts sections. On a phone it may be easier to just search 584 in the search box and choose it when it pops up.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
