Posted by rorybee on January 15, 2023 at 15:38:15 from (98.97.39.52):
lucky indeed, unfortunately one of the units came to me in pieces, all the hydraulic lines and controls are still there minus 2 rams has the tanks and whole undercarriage but its missing the motor, the main pump and one of the final drive motors (i do have the cogs for the tracks though). the information you have given me is great and indeed helpful! one of the drive motors is missing entirely. i will check the part number you gave me and see if i can find a reman'd drive motor, im still after more. with out breaking the bank on this rebuild all i have is an isuzu c223 na motor that i pulled from an isuzu pup that i may be dropping into it. i also have an om617 motor sitting next to it, im leaning toward the isuzu its naturally aspirated and ment for automotive so my rev limit is around 4300, ill be losing some power forsure but i figure theyre reliable as hell i can live with that, so what im thinking is that you have the 75 model which means you have the model i can more easily replicate. being that your 4jb motor is somewhat similar to the c223 motor i plan on using. my other 85 that runs has a kubota v3300 its seeming like my budget cannot afford one of those and they are seemingly hard to come by. looks like i will need to look into mating a rexroth aa10VG to the c223 then finding part numbers for the auxilary pump. something i noticed is that the 85 in pieces has a front PTO the other 85 with the kubotA does not
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let’s make one more addition to our series on hydraulics. I’ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.