Tractor Talk Discussion Board |
Re: Farmall Super C
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Stan(VA). on January 08, 1999 at 05:29:09:
In Reply to: Farmall Super C posted by Bob Almstrom on January 07, 1999 at 13:55:18:
I think this is caused by the main shaft seal being bad (the one with the drive gear). check the shaft under the seal to make sure it hasn't been worn under the seal edge and just replace the seals and put it back together. If you have high pressure all the time then look at the touch control unit for adjustments to make sure it allows the system to return to low pressure after rockshaft movement. You might also try posting this over on the farmall specialty board. Stan(VA).
Follow Ups:
Post a Followup
|