To be clear, SAE hose and fittings referred to as #10 are 5/8", inside diameter class, not the thread size. The SAE #10 means 10/16". SAE #8 would be 1/2", #12 would be 3/4", etc. They might be called Ford 5/8 O-ring fittings but since the SAE #10 O-ring boss fitting worked, I would expect Ford used SAE fittings under their part number in the parts books. This is common practice with manufacturers, and unfortunately, they seldom give the common industry name/size in the description which would make it easy to pick one up at a hydraulic shop or parts store.
To the original poster. You could have several different types and sizes of fittings used on the backhoe (even more if someone has changed any over the years, using generic hoses and adapter fittings as suggested here). Other than low pressure return hoses I expect you will have two wire, 3000-4000 psi working rating hoses on your backhoe.
Here are a couple links to some info on identifying fitting types and sizes that may help you.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
