Entirely depends on the garden and what you are wanting to raise. The Farmal would be good for a single row of sweet corn or something like that in 30 inch or wider rows. Now something like lettuce if you want to plant 20 inch rows would do 2 rows or possibly 4 rows at a time. The G gan have a 2 or 4 row vegitable planter that the implements would be hard to find. The narrow tires on the G would be able to work 15 inch rows. I never heard of a Farmall like that you could get a vegetable planter of cultivator, a Cub yes, a A or Super A now. So what type of gardening you want to do is what would make the difference. And a t tactor like the Farmall A or Super a or a 140 was never sold in my area as single row 40 inch rows for field work and no body around here ever bought a single row tractor for the simple reason of the single row cultivators in the field. Now the B or BN for 2 row cultivators yes. Only a collector around here would want a Farmall A or SA. And the G could also have had a single row for wider spsced crops. For a garden I would go with the G but for what around here would have been called a truck farm so the Faermal would be larfe enought to due the tillage work where the G is not big enough for that. But around here it would have been instead of a Farmall it would have been a John Deere M or 40 or 420. Only Farmall A or SA I ever saw was at a show featuring IHC.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
