Posted by Leroy on February 22, 2023 at 23:15:55 from (98.30.20.69):
Last fall I posted about the PCM on my truck. Winter set in and as it is a 2 wheel drive I left it parked as I have a 2003 Dakota 4 wheel drive. With spring comming I want to get back to driving the 01 as it is a 3.9 6 cylinder and gives better gas milage than the 4.7 8 cylinder. also better body. I got to thinking before trying to get a different PCM I would try cleaning the electrical conection. I think it might have the same problems that so many are having with no starts and being told to clean connections so I am trying to do that. I am trying to get the box for the air filter off to give me room to get to the connections. There is a bolt on the back right hand corner but the nut is gone. Then there is a bolt down the bottom of the box that I have gotten loose but I cannot get the box to lift out. Is there some hiden fastners that I am missing. When I get a chance on the nice days I want to try to get it back on the road. If I do have to get a different PCM then will still have to get the air gleaner box out to change it. Last fall I was told a new box would have to be programed for the truck using the vin. Local mechanic said he did not think something that old would need programing So if I do need a different unit it would be a lot cheaper to get one from a used parts yard.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
