I assume you must be talking about the YT store. Easiest way is to just click the rectangular box at the top of the forums that says ..Tractor Parts.. Then select anyone of the tractor brands that comes up in the drop down. That will take you into the parts catalog. Then at the top there is a Search box that says ..What can we help you find?.. When you click in it a drop down pops up but just ignore that and type in the number you want to search it will override what the drop down wants you to select. Then hit enter or click the search magnifying glass on the right of it.
I have bought very few parts from YT but I have long thought they would sell a lot more parts if their search function worked better. However, they must have done some upgrades because I just tried a couple of part numbers of two different manufacturers and behold it worked. Of course I got the part numbers out of one of the descriptions in the actual store offerings. There was a time that you could simply type in ..Farmall H Valve Cover gasket.. and the search would say it could not find your parts. As I said they apparently did some upgrades because that now produces some legitimate returns.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.