Posted by Jim.ME on April 19, 2023 at 10:35:21 from (67.242.176.154):
In Reply to: 2120 bucket removal posted by ndragon on April 19, 2023 at 09:53:17:
Quoting Removed, click Modern View to see
Welcome to the Forums. Telling the brand of what you are working on as well as the model helps as sometimes the same model numbers were used by more than one manufacturer. I am guessing you have a New Holland loader.
Remove the 4 pins that hold the bucket to the lift arms and bucket cylinders. There is one pin at each bucket cylinder and one pin at each lift arm connection point to the bucket. In the parts book it looks like one 3/8' x 3/4" capscrew secures the ear on each one to the bucket. If someone has modified how the pins are held to the bucket you need to match the removal of the pin to how it is now secured. That means cutting or grinding welds away if someone has welded them in over the years.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Cautionary Tale - by Ian Minshull. In the early 1950s my father bought an Allis Chalmers B and I used it for all the row crop work with the mangolds and potatoes, rolling and the haymaking on our farm. The farm and the Allis were sold and I have spent a lifetime working on farms throughout the country. I promised myself that one day I would own an Allis. That time event
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
