Posted by Texasmark on July 08, 2023 at 05:10:37 from (147.160.221.190):
In Reply to: Re: Vbelt Problem posted by Jim.ME on July 08, 2023 at 05:00:26:
I put the OEM number in a search engine and came up with a length and width. First off I went to ebay and they had numerous listings of the OEM part number and stated several X95 series Case-IH tractors they fit.
I Was installing a new alternator that matched the dimensions (I measured them side by side) of the old one other than the diameter of the pulley was smaller.....which should have helped,
Since I was in the middle of changing the alternator and decided that I didn't want an old belt with a new alt., I stopped work, went to town and bought a premium auto parts belt matching the 1/2 x 60.25 dimension. It wasn't wrapped, just cut on the sides.
The tractor is a Case IH 395. I have a full set of manuals for it and got the OEM part number out of the parts manual. Thanks
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
