Hello David welcome to YT! Yes, if by ..out the top.. that means to the injector lines yes. You may be surprised how small the amount is. How long has it been setting while you did this work? Hopefully you did not have biodiesel in it. That stuff is very bad at sticking pump parts when they set, I have heard of it happening in 3-4 months time. If you get any amount of fuel moving out of the injector supply fittings tighten them to the pump and break them loose at the injector up on the head and if you get fuel up to that point tighten them down then it should start firing. If you are getting no fuel out of the IJ pump and it has fuel coming out of the housing bleeder then you are probably unfortunately going to have to get the pump checked out. There is a guy on here who runs an injection pump repair business, many members here ship pump to him in Indiana to have them repaired. His charges are reasonable and always hear good things from satisfied customers. He posts as Dieseltech, many he will chime in.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
