|
Tractor Talk Discussion Board |
Re: H Seat
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by M Cooper on February 09, 1999 at 18:06:43:
In Reply to: H Seat posted by Ryan on February 09, 1999 at 16:01:37:
Ryan-we had the same problem on our H however this problem is not uncommon on older machines The bushings are not rubber. You will have to fabricate a metal sleeve or "bushing". We have the best luck by mixing and matching pipe nipples of different diameters (O.D.'s and I.D.'s) and then cutting and welding the pieces in place. We have even built them up with weld bead and then ground them to fit. Once in place, drill and tap the outside sleeve and put in a zerk fitting.
Follow Ups:
Post a Followup
|
