|
Tractor Talk Discussion Board |
Re: timing a farmall H
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by C.Fitz on February 09, 1999 at 19:49:21:
In Reply to: timing a farmall H posted by Brian Miller on February 09, 1999 at 11:04:44:
There is a single marked tooth on the crank gear that needs to be meshed with the 2 marked teeth on the camshaft gear. Then you can mesh the single marked tooth on the camshaft gear with the 2 marked teeth on your mag. gear. Clean the gears off good sometimes they are tough to see; they look like center-punch marks on the gear teeth. Hope this helps.
Follow Ups:
Post a Followup
|
