Tractor Talk Discussion Board |
Doodlebug
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by George Gibby on January 28, 2002 at 16:58:28 from (216.177.31.183):
Hey Everyone, I need your ideas and thoughts on building a Doodlebug Tractor for Pulling at a local club here in NH. For beginners a breif paraphase of the club rules. Homemade tractor from car or truck components (any combination); no industrial, no greater than one and a half ton axle carrying capacity original, nothing newer than 1942, stock, no weights, no chains. Center hub to center hub no more than 8 feet. Fixed draw bar height of 24 inches maximum (pulling clevis will be mounted to this),and attached to main frame. Maximum length from center of axle to hitch point is 4 feet. No locked rear ends. Two wheel Drive only. No manufactured tractor parts. No Tractor (agricultual or industrial) tires or lug tires. No rear wheel will be wider than 12 inch tread width measured by ground impression, must be DOT approved. At least one working brake. I have no real useful knowledge of vehiciles from these earlier years. Some of the club members are pulling with flat head V8's. I would like to take full advantage of the rules and pick the better components like axles with tall gears, transmissions, that will hold up to abuse, and a gas or deisel engine that can be fixed if needed and not break the bank. "Cheap is Neat." What ideas work for best weight distrubution, like setting back the front axle perhaps? Are there any books available on puller design? What truck tires are a good subsitute for Tractor Tires? I'm only in the planning stages but need to have a better idea of what to search for. If you have some doodlebug stories or hints please add your 2 cents by sharing your stories. Best Regards, G.G.
Follow Ups:
Home
| Forums
Today's Featured Article -
Listening to Your Tractor - by Curtis Von Fange. Years ago there was a TV show about a talking car. Unless you are from another planet, physically or otherwise, I don’t think our internal combustion buddies will talk and tell us their problems. But, on the other hand, there is a secret language that our mechanical companions readily do speak. It is an interesting form of communication that involves all the senses of the listener. In this series we are going to investigate and learn the basic rudimentary skills of understanding this lingo.
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|