Re: Re: Re: Gaskets, Cutting your own

Posted by DonWis on February 10, 2002 at 21:14:13 from (63.155.240.98):

In Reply to: Re: Re: Gaskets, Cutting your own posted by Big time on February 10, 2002 at 20:42:35:

Ive had good success in using a carrige bolt when you punch out the bolt holes. you center the round head of the bolt on the gasket over the hole and then hit the end of the bolt. Put a bolt in the punched hole to maintain alignment and then continue around the bolt circle. You end up with perfectly aligned holes. I actually look forward to making gaskets.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: Gaskets, Cutting your own Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]