|
Tractor Talk Discussion Board |
Re: Re: Re: Can I do better? (MF 35 values...)
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Chip on March 21, 2002 at 05:43:59 from (152.121.36.65):
In Reply to: Re: Re: Can I do better? (MF 35 values...) posted by K Kinsey on March 20, 2002 at 21:04:15:
I would suggest that you find out who your local dealers are, and look at equipment that can be supported by them. I have an MF 35 with the Perkins diesel, and for me that unit is just about perfect, but I've worked on Fords, IH and JD as well. You can find something good from all of them. The tractor you mentioned is a good solid unit, just not worth the 5k they're asking. Look for a mid size, like the one you found, with live PTO / hydraulics, brand is not as important as being able to support it. Good Luck.
Follow Ups:
Home
| Forums
Today's Featured Article -
Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
