Tractor Talk Discussion Board |
Re: Re: finding away to take rear tires off.
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Honkey on March 25, 2002 at 11:42:15 from (64.68.163.33):
In Reply to: Re: finding away to take rear tires off. posted by Matt Vanek on March 24, 2002 at 22:08:36:
Hi Matt, I would do one thing at a time. It will be much simpler and require less equipment. I use a regular bottle jack to lift on the rear axle housing. Something like a 6 or 8 ton will work fine. As for supporting the tractor after the wheel is off, I would use the heavier set of jack stands, I believe they are 10 or 12 ton. While the small stands would work, they don't have as much reach, so you would have to use a alot more blocks inbetween the tractor and jackstand. I would stay away from a handi-man jack. They aren't stable enough, safety first, use a floor jack or bottle jack! I hope you have enough room. Good luck Matthew in SD
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|