Tractor Talk Discussion Board |
Re: Does anyone here know why more people don't use flail mowers to cut their lawns?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jonathan on April 07, 2002 at 20:25:19 from (209.91.3.38):
In Reply to: Does anyone here know why more people don't use flail mowers to cut their lawns? posted by Warren on April 07, 2002 at 19:29:50:
well, an old flail mower would make an ok bush hog for grass, I don't think you'd want it for lawns though. If it was used by the highway dept no doubt its been used an awful lot and they're problably dumping it at an auction because its all wore out. check it out, turn the pto shaft and rock it back and forth with you hands to see if there is any slop and find out whats wore out. I really don't think there is anything that expensive on a flail mower except the gearbox, and by the way, if the gearbox is shot, which can be determined by turning the shaft, leave it, cause it ain't worth a nickle. ok, now on to the "blades", the blades, which there is alot of them, are on short pieces of chain attached to a shaft in the center (like a rototiller) which are held out by the force of the spinning motion and of course being on chains they can flex if you hit something which is a plus over a bush hog with a solid blade. The blade life would all depend on how many rocks or solid objects you hit. What the blades look like depends on what brand you go with so I can't help you there. I'd ask a dealer about how good they mow for your lawn before I bought to make sure that its suitable. good luck, Jonathan
Follow Ups:
Home
| Forums
Today's Featured Article -
The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|