|
Tractor Talk Discussion Board |
Re: Re: Re: Re: Re: Re: Re: ring and pinion setup
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob /Ont. on April 16, 2002 at 18:57:28 from (172.165.228.247):
In Reply to: Re: Re: Re: Re: Re: Re: ring and pinion setup posted by Dave on April 16, 2002 at 18:26:59:
Dave the pinion shims will move the tooth pattern. I you add shims the contact will move down to the tip on one side and up away from the tip on the other. If you remove shims the pattern will go the other way. I suggest you start with the shims you have and see how it looks. Always remember or record (draw picture) what you have, then compare to what you get after you change things. If you know where you came from then you know where you are going. That said back lash will affect the length of the contact pattern. I had hoped you where in south central ONT. and I could have dropped by. I'm sure you will get it now. Get some of the BLUE I said.
Later Bob
Follow Ups:
Home
| Forums
Today's Featured Article -
A Cautionary Tale - by Ian Minshull. In the early 1950s my father bought an Allis Chalmers B and I used it for all the row crop work with the mangolds and potatoes, rolling and the haymaking on our farm. The farm and the Allis were sold and I have spent a lifetime working on farms throughout the country. I promised myself that one day I would own an Allis. That time event
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
