Re: 430 John Deere

Posted by G Taylor on April 29, 2002 at 22:51:41 from (64.10.143.142):

In Reply to: 430 John Deere posted by Steve (OH) on April 29, 2002 at 09:36:19:

To be a 430 it has to be a 4 or 5 speed. The rounded fenders are the "Heavy Duty" units with three support ribs, The clam shells only have two ribs. The power adjust rear rims origionally would have had 12-28's(13.6x28) installed.
Wide fronts on Dubuque's are available with utility,standard,tri-cycle, row crop utility special and high crop chassis.
Pictures of the various models & casting numbers/part numbers are in the operators & parts manuals.
The serial number was mounted on the left side or top of the clutch bellhousing. Know of one where it was removed & then fastened to the dash.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 430 John Deere Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]