Tractor Talk Discussion Board |
Re: what mower to buy?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Scott Green on May 23, 2002 at 17:26:16 from (66.133.135.177):
In Reply to: what mower to buy? posted by kathy on May 22, 2002 at 19:43:34:
Kathy , All brands of rotary cutters seem to have cheapened down in quality. If I were going to buy a new one , I would look at them all very closely. In reality , if I were going to buy a rotary mower , I would look for an older good used one. Most likly , the brand name would be Brush hog or Woods. But any of the older good heavy ones. Hear are a couple of things I would look for. Personally , I would buy a tow behind one. It would have a split drive shaft(Not one strait shaft. It would have a slip clutch , although shear pin is fine. Full size rubber tires are nice , unless your chances of getting a flat is high , like mowing thorn apples. I would also get one with at least a 100HP gear box. I like a six footer for all around mowing. A tractor with 20HP or more will run a six footer nicely. I've mowed many fields full of brush with a John Deere "B" , which has less than 20HP. But a tractor the size of a Farm-all "M" , John Deere "A" , or Oliver "77" is a nice combination for a six foot , 100HP Rotary cutter. What size tractor do you have? You may want to post the size of your tractor. By the way , when I bought my rotary mower , it was a good used , older one. My deck is 1/4" thich steel. I bet you won't find that in a new one today. I would never buy a new one. Quality is too cheap.
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|