Tractor Talk Discussion Board |
Re: what mower to buy?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by DuaneW OH on May 24, 2002 at 13:33:26 from (12.100.121.94):
In Reply to: what mower to buy? posted by kathy on May 22, 2002 at 19:43:34:
Don't know what you are mowing, but I was looking and looking and looking for a "good" 7' or 8'used rotary cutter last spring. Stumbled across a used 88" Alamo flail mower in my price range. Got it. Glad I did. Flail mower weight is close to tractor meaning you don't need as big a tractor for the mower because of weight. Also mower does not swing as wide when turning, nice in tight areas, and the mower does not seem to throw things like a rotary. Does fine on heavy thistles and small saplings. If not cutting heavy brush but more grass,weeds, or underbrush, would work well. Drawback is NOT A GOOD HEAVY BRUSHCUTTER... Just something to consider... Oh, picked mine up for $1,100.00 bucks, have mowed 60+ acers, only spent $50 bucks in repairs so far. Not bad in my book. Duane W.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|