Re: Ford 801

Posted by Alton on June 06, 2002 at 19:49:49 from (64.4.102.212):

In Reply to: Ford 801 posted by OWD on June 06, 2002 at 13:25:12:

Sediment bowl shut off screw should have a nut that you tighten as the screw wears the seal to keep it from leaking. The bowl & hanger have a gasket and screen at the top. If gas is not coming in the bowl you have a air tight line to the carb.take the drain plug out the bottom of the carb to bleed the line. The carb leaking if the tractor is not running is probably the needle and seat under the float, trast or damage done to the needle caused this to leak. The fix is first to shut off gas and run carb empty, refill with gas,this may wash out any trash If this doesn't work replace the needle and seat adjust the float level.
Rings on hydraulic pump leaking is if you used genuine replacement parts are pinched or improperly torqued bolts. If you matched the o rings they may not be the exact size. Why did you replace the o rings? Was it leaking before? May have a cracked housing.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Ford 801 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]