Re: HOT light switch

Posted by JMS/MN on June 07, 2002 at 21:41:23 from (67.250.221.183):

In Reply to: HOT light switch posted by James on June 06, 2002 at 14:46:02:

Is your 4020 wired for 24 volt gen/starter and 12 volt lights, or has it been converted to the all 12 volt system? Old system was a wiring nightmare, trying to keep the load balanced between batteries, etc. When problems developed, extra bright headlights signaled 24 volts going to the lights and they burned out soon. I suspect you may have the same problem with the switch. There is no dimming of the dash lights- there is one light, and it glows the same intensity at all times. Old system also had a grounding fuse on one battery. Switching to 12 volt system is well worth it- did it on both 4020 and 3020 and don't regret it.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: HOT light switch Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]