|
Tractor Talk Discussion Board |
IH Super C hydraulic pump
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by L.E. Davis on July 05, 2002 at 17:11:36 from (216.76.236.73):
Having problems with a new replacement pump. pressure is causing the pump shaft seal to be pushed forward up and out of its seat in the pump housing and letting the fluid leak into the crankcase.I have pulled the pump back off once and found the seal up next to the pump drive gear.I realigned the seal and seated it back into its proper position. I bolted everything back up and put in new fluid and it pumped all the fluid out again. What am i missing here? Maybe a snap ring for holding the seal in place? Or is it a spacer missing between the housing and the gear? If anyone out there can help me please let me know. I am a mechanic but i am not familar with this tractor. It is a 1953 model Super C Farmall.I Am located several miles away from this unit so i could use some information before i return to work on it.Thanks.
Follow Ups:
Home
| Forums
Today's Featured Article -
On the Road with Dave Gohl: Auction Musings - by Dave Gohl. I was thinking the other day about all the auctions I've been to in the last few years. There've been many. Some have been very good, some have been well, disappointing to say the least. But no matter how good or bad auctions may be, we always seem to stay until the item we've come for or are interested in is on the block. I've been to some auctions near and far. I think the furthest has been the Two Cylinder 7 in the Amana Colonies last year. Lots of stuff, lots of people. I've also atten
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
