Tractor Talk Discussion Board |
Re: Should I buy it?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dale on August 01, 2002 at 23:41:21 from (67.193.134.195):
In Reply to: Should I buy it? posted by Peter on July 31, 2002 at 20:48:45:
I bought a 2290 Case 4+4, that had a fire under the cab ,Just luck the hired man saw a light when they were done Milking one night [January of 1993] I redid it in 1994, Do to Electric Chopper Control's / No Fuse's or Curcit breaker.It burned every thing under the Cab[bacause it shorted out and got in to the Wiring Harness,witch whent over next to the Plastic Fuel Line[witch makes a good Hot Fire[the heat Warped the 1/2 inch thick rail be side the Engine, Bacuse of this it was Totaled Poasable Engine Damage[ I have never had any truble with it],Her are some of the things repaired or replaced,Hood,[ Fiber Glass] radator,streeing hoses and valve[resealed it],the cab inside was hot enought to disfiger all the plastic[was able to save the hour meter,it did not burn any thing in the cab, it still work's to this day]I had to re do every hose ,and reseal the valves,under the Cab. The tractor was totaled by the Insurance Company, I bought it for $4500 [from the farmer who owned it ] and spent $4500 more just to make it Usable for myself,to finsh it ,I think about $2500 more. Do you know WHY It BURNED, Rember there poeple who Use a Fire to Cover up other Problems, on the tractor they Can't Aford to repair, or the Payments on it or other things they need Money for that are not Insured. I have seen this done on tractors that have went to a local salvage yard. Do one thing before you go a head and buy it /get a Cost on the parts /New and Used /that you need [the ones you can see damaged, then Figger the cost Of Your Labor and see how the total cost looks then? I wood do another tractor if i Knew why if burned and how bad. Good luck with your choice
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|