|
Tractor Talk Discussion Board |
Re: tractors cover
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jim.UT on January 01, 2003 at 07:19:55 from (205.188.209.109):
In Reply to: tractors cover posted by Linda Dickerson on January 01, 2003 at 07:12:25:
I wouldn't cover it at all. I cover my tractor with a blue poly tarp when it's sitting next to the house waiting for its next job, but that's only because I don't have a shed to park it in. When the wind blows (simulating what would happen if it were being hauled down the highway on a trailer) the tarp whips and moves such that it wears the paint right off wherever it touches. Not a big deal with me because mine is not a show tractor. A softer material wouldn't be tough enough to take the abuse IMO. You might be able to get a custom tarp maker to custom fit a cover that fits snug and won't let any air underneath while in motion, but it could be costly. If you're trying to minimize damage from flying rocks while hauling, I would consider a covered trailer or at least a V shield in front to keep road debris from cracking your headlights or pitting the paint on your grille.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
