Re: Ford 2000 weights

Posted by RWK in WI on January 05, 2003 at 08:33:47 from (169.207.134.6):

In Reply to: Ford 2000 weights posted by Bob on January 04, 2003 at 19:57:49:

A part of the answer depends on what type of
2000 you have. The 4 cylinder ones are the
same as the earlier hundred series, the 3
cylinder ones usually have the wheel disks
that have 3 equally spaced holes in the disk.
The pie weights will fit both the hundred
series and the 3 cylinder tractors. These sets
come in different weights and tend to be
expensive, but you can mount them easily and
adjust the weight as needed.
The circular style Ford weights fit on wheels
with the three holes in the disk. These are
sometimes cheaper but I have found them
harder to mount.
If you have power adjust wheels, you need to
watch that you have enough clearance.
Measure carefully.
I hope this helps you.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Ford 2000 weights Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]