Tractor Talk Discussion Board |
Re: MF 245 Remote Hydraulic Control Valve
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Gerald J. on June 17, 2007 at 15:15:39 from (67.0.97.173):
In Reply to: Re: MF 245 Remote Hydraulic Control Valve posted by DALE HINTHORN on June 17, 2007 at 13:58:21:
Its not necessarily true that the remote valve is universal. It is if its supply and return are hoses, but there has been a series of valves made for MF and Ford tractors that bolts down on top the rock shaft cover under the seat that taps the internal hydraulics and allows that to work normally or that hydraulic power to be diverted to one or two remotes with NO hoses or pipes between the tractor and the valve. Those valves are NOT universal. Also not every general purpose valve can be converted to closed center. The least expensive valves can't often be converted. They have to be planned for conversion. Your shift lock seems stuck, else you are shouting and that's not necessary in this forum. Gerald J.
Replies:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|