Re: Udate:::Now I've gone and done it!!

Posted by 37 chief on June 17, 2007 at 15:40:46 from (70.181.167.25):

In Reply to: Udate:::Now I've gone and done it!! posted by Keith-OR on June 17, 2007 at 11:05:51:

Isn't it amazing how something so simple can turn into a big mess. You might as well do a valve job since the head is off. Before you run out and look for a used head try cutting the piece out with a cutting torch. If you are quick the thread piece will cut before the cast iron head.I have also broken a plug off , it gives you a instant real bad feeling. The old VW's were famous for plug problems. Thy would just strip out the threads. I have done that a time or two also. Stan

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]