Re: POWER BLOCKS IN JD.

Posted by JD70Jim on February 09, 2003 at 21:45:04 from (12.215.70.158):

In Reply to: POWER BLOCKS IN JD. posted by JOHNNY on February 09, 2003 at 19:48:15:

Power blocks were sold by the Tractor Supply Company, for various two cylinder John Deere tractors. It was an effort to increase displacement and achieve higher horsepower. The "quality" of the actual powerblock is not as good as the original John Deere, but the bigger pistons and greater displacement make up for that. As for shop instructions, I would thingk that the powerblock casting is similar enough to the original, that any instructions regardong the original would apply to the powerblock---except for the specifications for the pistons, etc.

Powerblocks are not available, new, anymore.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: POWER BLOCKS IN JD. Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]