|
Tractor Talk Discussion Board |
Re: Mounting an electric winch on MF 245 front weight bar
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Gordon from New Hampshire on February 15, 2003 at 16:17:52 from (24.62.208.68):
In Reply to: Mounting an electric winch on MF 245 front weight bar posted by Louie on February 14, 2003 at 08:15:13:
The electric winch would probably do what you want, but don't just figure the weight of the machine. If you're mired at just the wheels, the pull to free it is DOUBLE the weight of the machine. This increase again in deeper mud/sand and also on inclines. The hydraulic ram idea is a good one. For lots of winching, I'd use a PTO model. Electric winches pull a ton of amps. Just some thoughts. Much luck Gordon
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
