Tractor Talk Discussion Board |
Re: Farmall H
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bill Smith on February 18, 2003 at 11:07:07 from (63.147.130.87):
In Reply to: Farmall H posted by Justin on February 18, 2003 at 07:56:17:
It's possible to fix and restore it. Ussually a froze engine requires additional work and expense if you have to replace internal engine parts. If time and money is a little short, you may want to find another tractor to restore. If plenty of time, and extra expense is not a problem, you may want to work on this one. It would require additional work which may be good for a bunch of young folks trying to learn something out of the project. Just be sure that somebody is involved that knows what they are doing so mistakes are not made and the work gets done right. A dead end can be found pretty quick on an antique tractor project if somebody doesn't know what they are doing and make a bad mistake.
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|