Re: Hydraulics Lose Power

Posted by mj on February 20, 2003 at 17:12:51 from (216.52.32.160):

In Reply to: Hydraulics Lose Power posted by Uncle Dave on February 20, 2003 at 07:49:12:

Is this a gear-type hydraulic pump? I rebuilt
one years ago with the same results you are
describing...turned out the new parts-store
gasket for the pump cover was about .010
thicker than the original which gave too much
side clearnace between the gears and the
housing. I replaced the new gasket with the
old one, it was still good, and
BINGO!.....pressure was back to normal. Just
a thought.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Hydraulics Lose Power Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]