Tractor Talk Discussion Board |
Re: What tractor should I look for?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bill Chesser on May 08, 2003 at 07:21:09 from (209.212.133.61):
In Reply to: What tractor should I look for? posted by Randi on May 07, 2003 at 08:22:14:
Randi, One of the first things you need to find out is what dealerships are around you. If you have to haul the john deere 60 miles for repairs when a ford dealership is 15 miles away, this information should be placed in your thinking. John Deere, Ford, International Harvister all make good tractors. Some years and models are better than others, but you would have to speak to someone more knowlegable than I for that information. For mowing 16 acers, anything over 30hp will do fine, but if you want to plow, you may want to go higher. A 55hp will do anything you may need. Talk to the tractor repair people and ask the what they would recomend and what they would avoid. You can buy used from the dealership, you will pay more, but they will have gone over the tractor made some repairs and hopefully replaced all the filters and fluids (make them do it and don't forget the transmission and hydrolic screens and filters). Buying one parked at the side of the road like I did is more risky, but the price can be half as much. Whatever you buy, put it in the barn and grease it before all operations, as a large machine mechanic friend of mine says, "grease is cheaper and eaiser to put in than parts". Have fun.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|