Tractor Talk Discussion Board |
Re: Tractor bucket loader problem
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Brokenwrench on May 23, 2003 at 10:38:45 from (200.147.95.235):
In Reply to: Tractor bucket loader problem posted by whitebluff on May 23, 2003 at 05:44:30:
If ´´by just leaks down´´ you mean the loader will not power down or the bucket will not curl, I would look at the following, If the loader is plumbed through a loader valve into the remote on the tractor,check the quick connects at the remote.They can pop loose and not let the oil to return to the tractor. If it is plumbed directly into the tractor,I would look at the return line to the tractor to see if it is connected, crushed,or otherwise damaged. If all else fails, remove the return line from the tractor,put it in a bucket and see if the loader will operate,(be carefull) and you have a good flow of oil into the bucket. If you have a good flow, look for a restriction in the tractor, if you don´t have any flow, the hose could be collapsed inside, or you have a problem internally in the valve.
Follow Ups:
Home
| Forums
Today's Featured Article -
Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
1945 Farmall wide body gas with pto and front plow. Runs good but needs new points.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|