|
Tractor Talk Discussion Board |
Re: Re: Re: Re: Re: Re: Re: New Belarus tractors -
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Rod F. on August 05, 2003 at 21:25:40 from (142.177.93.102):
In Reply to: Re: Re: Re: Re: Re: Re: New Belarus tractors - tir posted by RAB on August 05, 2003 at 11:18:55:
Hi RAB, Of course you're right. Metric and Imperial threads are different size. My thought was more in line with simply establishing size by eye, not the conversion, as such. Pitches are standard at 1, 1.5 2 mm etc. That's not difficult, only that a mulitude of closely spaced sizes often leaves me guessing, or running for the gauge. As I said before, I am well metricated. That was all that was taught in school in my time. It's not hard to understand, just that as Trevor mentioned, some of us are resistant to change. I spread fertilizer in pounds per acre. As for the conversion...it's 2.54acres per hectare, to be picky. As for NASA, I saw the reports at the time. "Excuse" seems to be the operative word there. As for volume, I tend to use liters, for that very reason. A gallon is never a gallon. You're also correct that the UK switched to metric long ago. Remember the shop keeper a few months back who was charged for selling banannas by the pound instead of the kilo? You must also be aware of the mother of all measures, James Watt's horse power....the work that a horse will do in one hour. Like I said before, I use both systems, often interchangeably, depending on what one is convenient at the time. Generally I use metric for calculations, and Imperial for most practical stuff. But that's just me, and i've never been accused of being normal.Take care. Rod
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
