|
Tractor Talk Discussion Board |
Re: How much wieght?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Kydirtfarmer on August 07, 2003 at 04:45:18 from (152.163.252.71):
In Reply to: How much wieght? posted by Kydirtfarmer on August 06, 2003 at 04:04:39:
O.K. Back to me again.
I guess that I should be more specific about my situation.
The 2440 was on a scale last night. 7385lbs. (With full fuel tank). The tractor is around 5350. Add for a roll bar, and canopy, as much as 600lbs of front wieghts (at times), and what figures out to be about 1535 lbs. in fluid. (767lbs. per wheel.)
Now. The tractor is going to be used in a number of ways. Primarily to run a 7' tiller, a 7' bushhog, and to pull a Brillion seeder. That is the primary "focus" of the custom work I do.
In it's "spare time, it will help out on the farm. It will cut and rake hay, bushhog, and a few weeks a year, pull a 4 row planter. (No-till, This is where the wieght MAY be needed)(JD 4x30" w/ liquid fert. saddle tanks on the tractor.)
Except for pulling the planter, it is replacing a 46 year old, 33 HP, MF50. That tractor is about 5000lbs. as we used it. It NEVER had any trouble doing what was asked of it. We have 2 more tractors that are bigger than the 2440,(4020, and 4440), AND, the 2440 spends a great deal of it's time on a trailer, moving from job to job. It would be nice if it was lighter.
With 2 or 3 rear wheel wights on each side, and the fluid gone away, I would still get a good 5600 to 5800lbs. I know about the ride and the air pressure part.
I needed the higher horsepower, but not the larger, heavier tractor for my work. (Golf course construction/lawn building)
I'll let you all know how it works out. The fluid is being pumped out of the first tire as we speak.
Thanks for all the input. Bill
Follow Ups:
Home
| Forums
Today's Featured Article -
Good As New - by Bill Goodwin. In the summer of 1995, my father, Russ Goodwin, and I acquired the 1945 Farmall B that my grandfather used as an overseer on a farm in Waynesboro, Georgia. After my grandfather’s death in 1955, J.P. Rollins, son of the landowner, used the tractor. In the winter 1985, while in his possession the engine block cracked and was unrepairable. He had told my father
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
