Re: coil replacing a magnito

Posted by TimC on August 09, 2003 at 20:22:47 from (199.91.33.254):

In Reply to: coil replacing a magnito posted by Dave on August 09, 2003 at 19:24:41:

Remove existing coil. Run wire from points out the back case where points are mounted to where the old coil was you threw away. Come out the side of the mag thru what is I believe is an access hole up to the coil. Mount a condenser next to the access hole and attach the points wire and condenser wire to the negative on the coil "provided you are 12v negative ground". Run 12 positive thru on off switch to positive on coil. Condensor has to be grounded "hence mounting to the old mag or any other proper gound".

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: coil replacing a magnito Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]