Re: bent rod on kohler engine

Posted by Gary-Miss on August 31, 2003 at 18:28:01 from (205.188.209.105):

In Reply to: bent rod on kohler engine posted by kraig on August 31, 2003 at 15:34:48:

Most any small engine dealer can get you a rod. When you replace it, start using 5W-30 oil instead of straight30. These rods are kind of fragile and they don't like to stir that thick 30wt oil when it's cold. If you have some of the rod stuck to the crankshaft (or piston to the cylinder wall) you cantake it off with a bit of Muriatic acid. It will rust stuff like crazy, so, be sure to spray everything down good with WD-40 as soon as you get it off.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: bent rod on kohler engine Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]