Tractor Talk Discussion Board |
Re: Re: Re: Re: Re: anyone ever moved a grain bin?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by markct on October 13, 2003 at 19:33:40 from (12.90.166.197):
In Reply to: Re: Re: Re: Re: anyone ever moved a grain bin? posted by paul on October 13, 2003 at 19:13:13:
yea unfourtanatly we seem to be stuck with the hard way. i just dont see anyway to slide it out without it falling over since its on a sidehill, and being that it is so far away we are limited by the equipment we can use there, he had looked into a crane but it was gona be more than the bin cost to have them come out and do it, we both know a few people localy who have large forklifts and small cranes, but where the bin is located is farther than any of them want to travel realy. i got an electric impact gun so that should help alot, and we have scaffolding so that should help alot too. the plan we have is to dissasemble it so it has just one ring above the cone on the bottom, that way the legs and cone wont have to come apart, we should have enough room to lay that down and slide it onto the trailer we figure. like i said we are realy limited on what we have to work with there, since its not a farming area there isnt any other farmers around that we could hire to help with a loader or anything like that, so its basicly small tools for us.
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|